Refractory Gunning for Mixer Furnace

Refractory Gunning for Mixer Furnace Introduction
 
Refractory gunning using a high speed air stream as a carrier for a refractory material is called a spray refractory material, includes a spray material for repairing a damaged lining and a spray paint for constructing a new lining.
 
Refractory Gunning for Mixer Furnace Feature
 
1. Gunning refractory has strong slag corrosion resistance.
 
2. Refractory gunning has good erosion resistance.
 
3. Gunning mix has good thermal shock stability.
 
Refractory Gunning for Mixer Furnace Specification
 

 
Refractory Gunning for Mixer Furnace Application
 
1. Hot gunning is widely used to construct or repair blast furnace tapping trenches, torpedo tanks, steel drums, tundish, rotary kiln and garbage incinerators for construction and repair.
 
2. Gunning mix is suitable for hot repair of iron furnaces, ladle bottles.
 
Refractory Gunning for Mixer Furnace Precaution
 
Gunning mix refractory product should be protected from moisture. Do not use if it has been agglomerated.
 
Refractory Gunning for Mixer Furnace Packing
 
Woven Bag Packaging
 
1. 1000kg/bag
 
2. 500kg/bag
 
3. 50kg/bag
 
4. 25kg/bag
 
Refractory Gunning for Mixer Furnace Manufacturing Process
 
1. Determine the refractory raw materials used in magnesium spray coating according to the formula to ensure the quality of raw materials.
 
2.Calculate weighing ingredients according to the formula, control the size and proportion of aggregate and powder particles, and strictly calculate the ratio of raw materials, additives and usage.
 
3. Place the prepared powder and aggregate first in a blender and mix for about 5 minutes. Then add the powder to the aggregate and mix it evenly for 8-10 minutes.
 
5. The gunning mix refractory is equipped with additives and binders, and then stored in the warehouse.
 
Refractory Gunning for Mixer Furnace Installation Procedure
 
1. Before the construction, the concrete surface should be degreased and decontaminated.
 
2.Paint mixing: according to water: paint = 100:120 ratio of ingredients. First, add water to the paint and mix it evenly. The finished paint should be used up within 2 hours. Due to different construction tools and weather conditions, water can be added as appropriate.
 
3.Construction method: The construction should be carried out above 5 °C. The first road should be sprayed, the thickness is about 3-5mm, and the thickness of each time is about 3-5mm until the fireproof design requirements are met. The interval between each construction is not less than 24 hours.
 
4.Surface decoration: If refractory gunning construction, the appearance of the coating is a uniform granular surface, which has a sound-absorbing function, generally not to be smoothed. When it is necessary to smooth the treatment, it should be done after the tail spray. When there are surface decoration requirements, other decorative materials can be sprayed (brushed) on the surface of the fireproof coating.
 
Refractory Gunning for Mixer Furnace Manufacturer in RS Refractory Factory
 
ZHENGZHOU RONGSHENG KILN REFRACTORY CO., LTD specializing in the production of refractory materials for nearly 20 years, now has formed a comprehensive enterprise for the production of refractory materials for the metallurgy, building materials, power, and chemical industries. Refractory products exported to the United States, India, Japan. South Korea, Pakistan and other countries. Company qualifications:CE, ISO 9001 2008 Standard, ISO 9001 2015 Standard, OHSAS18001:2007 Standard.